| Performance Characteristics | UV+ thermal curing / Fast curing, suitable for FPC device protection, excellent SIR characteristics, low moisture permeability, good heat resistance and reliability / Moderate modulus, excellent spray applicability |
|---|---|
| Viscosity (cPs@25℃) | 7,200 |
| Hardness | D55 |
| Tensile Strength (MPa) | 200.0 |
| Elongation at Break (%) | 300.0 |
| Performance Characteristics | High aspect ratio after dispensing / Dual curing with UV and heat, curable at low temperature / Exellent adhesion / High reliability |
|---|---|
| Viscosity (cPs@25℃) | 60,000 |
| Hardness | / |
| Tensile Strength (MPa) | 19.3 |
| Elongation at Break (%) | 49.0 |
| Performance Characteristics | Fast curing / High bonding strength / High elongation, easy to peel, with resistance to moisture, heat, and chemical shock |
|---|---|
| Viscosity (cP5@25℃) | 45,000 |
| Hardness | A35 |
| Tensile Strength (Mpa) | 1.1 |
| Elongation at Break (%) | 497.0 |
